List of products by brand FISCHER

Complete fastening set with screws and dowels reduces assembly times to a minimum - With anti-vibration bearings - Flexible positioning of consoles - Alignment without additional aids - Easier installation thanks to corner construction with the KLIK quick-closing mechanism - Plug-in shelf rapid with crosspiece for KLIMA KLIK external air conditioners Characteristics: Dimensione: 42x40x78 cm. Unit of measure: CF

BLACK RUBBER bumper with NYLON plug fischer Characteristics: Articolo: SB9/11 Colore: Nero Unit of measure: PZ

The calibrated thixotropy allows excellent functioning for horizontal and vertical applications (the resin does not drip or drip, allowing excellent adhesion of the bar) - The absence of styrene and the reduced content of volatile organic compounds (VOC - VOC) ensure allows use in internal environments - The resin can also be applied in damp holes: in this case the times for applying the load must be doubled Characteristics: Tipo: FIS P PLUS 300T Contenuto: 300 ml. Unit of measure: PZ

Injection resin in hybrid polyester without styrene certified for anchoring in masonry and non-cracked concrete for medium-light loads - The resin can also be applied in damp holes - It is a resin certified for use in masonry and non-cracked concrete Characteristics: Tipo: FIS P PLUS 410C Contenuto: 410 ml. Unit of measure: PZ

CHEMICAL ANCHOR "T-BOND PRO.1" FISCHER Characteristics: Tipo: T-Bond Pro.1 Contenuto: 300 ml. Unit of measure: PZ

CLAMP for pipes fischer Characteristics: Ø: 13 mm. Unit of measure: PZ

CLAMP for pipes fischer Characteristics: Ø: 16 mm. Unit of measure: PZ

Drill for masonry widia "SUPER DD-sdx" FISCHER Characteristics: Ø x L.: 4x75 mm. Unit of measure: PZ

Sealing plug with stainless steel screw - For applications on tiled walls, both directly on the tile and in the joints - For installations in the bathroom, shower, kitchen, garage, sauna, Turkish bath, shed, swimming pool, etc - Certified sealing quality up to level W3-I, therefore suitable for surfaces that are frequently wet or with temporary stagnation of water - Quick and easy installation on any type of wall or material Characteristics: Articolo: 557727 Ø x L.: 6x38 mm. Unit of measure: PZ

FID II can be installed in the insulating panel with a cordless screwdriver with TX 40 recess insert - It does not require pre-drilling - Pre-drilling is recommended only in the case of plaster exceeding 10 mm - The special threaded spiral finds its seat in the insulating panel anchoring firmly and preventing damage to the support - Box pack 50 pcs. Characteristics: Articolo: FID II Lunghezza: 50 mm. Ø Foro: 8 mm. Unit of measure: PZ

FID II Plus allows flexible use because it can be combined with screws with a diameter of 4.5 to 6.0 mm - The milling underhead allows for perfect installation flush with the surface - The additional use of a chemical component, such as fischer Fill&Fix, allows for a significant increase in loads - Maximum safety guaranteed as the product is made of glass fibre reinforced plastic Characteristics: Articolo: FID II PLUS Lunghezza: 80 mm. Ø Foro: 8 mm. Unit of measure: PZ

Self-drilling and centering dowel for quick and easy installations on plasterboard panels and sheets - Equipped with a pre-installed metal point that is ejected when the screw is inserted - Reinforced helix and anti-rotation slats Characteristics: Articolo: Doublade S Misura Vite: Ø 4,5x40 mm. Misura Tassello: 44 mm. Unit of measure: PZ

Plug with screw in jar - 4 sector expansion for optimization of forces in the material - Expanded collar to facilitate installation - Designed to avoid damage to tiles and plaster during screwing - Plug usable for many daily applications Characteristics: Articolo: SX-6S Ø x L.: 6x30 mm. Confez.: 200 pz. Unit of measure: CF

LONG Drill for masonry widia "SUPER DD-sdx" FISCHER Characteristics: Ø x L.: 6x250 mm. Unit of measure: PZ

Bi-material extended anchor with pre-assembled zinc-plated screw T.S.P. and Torx drive - Certified applications on any substrate thanks to the intelligent combination of design and materials - Suitable for fastening fragile materials and close to the edges thanks to the innovative slat geometry - Pre-assembled fischer safety screw with countersunk flat head in galvanized steel Characteristics: Articolo: 562155 Ø x L.: 10x100 mm. Unit of measure: PZ

Bi-material extended anchor with pre-assembled zinc-plated screw T.S.P. and Torx drive - Certified applications on any substrate thanks to the intelligent combination of design and materials - Suitable for fastening fragile materials and close to the edges thanks to the innovative slat geometry - Pre-assembled fischer safety screw with countersunk flat head in galvanized steel Characteristics: Articolo: 562157 Ø x L.: 10X120 mm. Unit of measure: PZ

The expansion dowel SX transfers forces optimally into the building material thanks to the 4-section expansion - The expansion dowel is the best solution for fastening, for example, lighting fixtures, tubs and toilets and cupboards light wall in concrete (normal and aerated) - Versions with collar prevent the plug from slipping into the hole. The supplied screw has a flanged head. Characteristics: Articolo: SX PLUS 8-BM Ø x L.: 8x40 mm. Unit of measure: PZ

NYLON PLUG WITH SCGERW "DUOPOWER S" FISCHER Characteristics: Articolo: 537646 Ø: 6 mm. Unit of measure: PZ

NYLON PLUG WITH SCGERW "DUOPOWER S" FISCHER Characteristics: Articolo: 537645 Ø: 5 mm. Unit of measure: PZ

No thermal bridges thanks to the insulating cone - Installation without mounting accessories - The self-cutting plastic cone - Exact alignment of the object to be fixed without damaging the external thermal insulation composite system (ETICS) - Suitable for all substrate materials Characteristics: Articolo: 45687 Misura: Ø8/100 M6 Unit of measure: CF

ROUND COLLAR FOR RAIN PIPES "SCP MARRONE" FISCHER Characteristics: Misura: Ø 80 mm. Finitura: Marrone Unit of measure: PZ

SOCKET PLUG FOR CHEMICAL ANCHOR "FIS H" FISCHER Characteristics: Articolo: FIS H 16x85 N Ø x L.: 16x90 mm. Unit of measure: PZ

SOCKET PLUG FOR CHEMICAL ANCHOR "FIS H" FISCHER Characteristics: Articolo: FIS H 18x85 N Ø x L.: 18x90 mm. Unit of measure: PZ

STAINLESS STEEL nut "kd 4" fischer Characteristics: Articolo: KD 4 Vite: 4x95 mm. Carico: 200 kg. Unit of measure: PZ