Plugs - Bolts - Anchors

Red plastic cap - For Ø48 tube and Ø 8/20 ironwork - Pack of 200 pcs. Characteristics: Mis. ferro: Ø6÷20 mm. Mis. tubo: Ø48 mm. Unit of measure: PZ

"MUSHROOM-02" CAP FOR SIGNALLING Ø16/32 Characteristics: Misura: 16÷32 mm. Unit of measure: PZ

Anchor with eyelet internal Ø 50 mm. - With hexagon for key 21 - Complete with anchor Characteristics: Articolo: MP51 MAT Ø x L.: 18x120 mm. Unit of measure: PZ

Essential for the rigid connection of the eyelet to the facade scaffolding - In galvanized steel for the eyelet-scaffold connection complete with protective cap - for use with OP12 and GP12 eyelets, internal diameter 23 mm. - Pack of 10 pcs. Characteristics: Articolo: TOCPRO2 Ø Tubo: 48 mm. L. x Ø.: 500x20 mm. Unit of measure: PZ

ANCHOR universal triple socket knot anchors Characteristics: Vite + Interto: 6 mm. Unit of measure: PZ

Universal two-component anchor - With TPS screw - "2-Components System" technology - Greater resistance and perfect adaptability on all supports - High load capacity, maximum fixing safety Characteristics: Articolo: 18120 Ø x L.: 5x27 mm. Vite: 4x30 mm. Unit of measure: PZ

The calibrated thixotropy allows excellent functioning for horizontal and vertical applications (the resin does not drip or drip, allowing excellent adhesion of the bar) - The absence of styrene and the reduced content of volatile organic compounds (VOC - VOC) ensure allows use in internal environments - The resin can also be applied in damp holes: in this case the times for applying the load must be doubled Characteristics: Tipo: FIS P PLUS 300T Contenuto: 300 ml. Unit of measure: PZ

Injection resin in hybrid polyester without styrene certified for anchoring in masonry and non-cracked concrete for medium-light loads - The resin can also be applied in damp holes - It is a resin certified for use in masonry and non-cracked concrete Characteristics: Tipo: FIS P PLUS 410C Contenuto: 410 ml. Unit of measure: PZ

CHEMICAL ANCHOR "T-BOND PRO.1" FISCHER Characteristics: Tipo: T-Bond Pro.1 Contenuto: 300 ml. Unit of measure: PZ

Bi-material self-drilling plugs for medium loads Characteristics: Vite: 5 mm. Ø x L: 18x50 mm. Unit of measure: PZ

Self-perforating dowel for fixing on insulation Characteristics: Ø x L.: 25x50 mm. Unit of measure: PZ

Nylon dowel - Complete with flat countersunk head screw - Application: concrete, stone, solid brick, semi-solid brick, perforated aerated concrete Characteristics: Ø x L.: 10x100 Unit of measure: PZ

Nylon dowels with rounded gray collar - T.S.P. white galvanized Characteristics: Articolo: MN103 Ø x L.: 6x32 mm. Vite: 3,8x37 mm. Unit of measure: PZ

Indispensable for the rigid connection of the eyelet to the facade scaffolding - Available in different versions for coupling with the most popular eyelet systems for scaffolding Characteristics: Articolo: TOCPRO1 Ø Tubo: 48 mm. L. x H.: 500x170 mm. Unit of measure: PZ

Sealing plug with stainless steel screw - For applications on tiled walls, both directly on the tile and in the joints - For installations in the bathroom, shower, kitchen, garage, sauna, Turkish bath, shed, swimming pool, etc - Certified sealing quality up to level W3-I, therefore suitable for surfaces that are frequently wet or with temporary stagnation of water - Quick and easy installation on any type of wall or material Characteristics: Articolo: 557727 Ø x L.: 6x38 mm. Unit of measure: PZ

FID II can be installed in the insulating panel with a cordless screwdriver with TX 40 recess insert - It does not require pre-drilling - Pre-drilling is recommended only in the case of plaster exceeding 10 mm - The special threaded spiral finds its seat in the insulating panel anchoring firmly and preventing damage to the support - Box pack 50 pcs. Characteristics: Articolo: FID II Lunghezza: 50 mm. Ø Foro: 8 mm. Unit of measure: PZ

FID II Plus allows flexible use because it can be combined with screws with a diameter of 4.5 to 6.0 mm - The milling underhead allows for perfect installation flush with the surface - The additional use of a chemical component, such as fischer Fill&Fix, allows for a significant increase in loads - Maximum safety guaranteed as the product is made of glass fibre reinforced plastic Characteristics: Articolo: FID II PLUS Lunghezza: 80 mm. Ø Foro: 8 mm. Unit of measure: PZ

Self-drilling and centering dowel for quick and easy installations on plasterboard panels and sheets - Equipped with a pre-installed metal point that is ejected when the screw is inserted - Reinforced helix and anti-rotation slats Characteristics: Articolo: Doublade S Misura Vite: Ø 4,5x40 mm. Misura Tassello: 44 mm. Unit of measure: PZ

Plug with screw in jar - 4 sector expansion for optimization of forces in the material - Expanded collar to facilitate installation - Designed to avoid damage to tiles and plaster during screwing - Plug usable for many daily applications Characteristics: Articolo: SX-6S Ø x L.: 6x30 mm. Confez.: 200 pz. Unit of measure: CF

Universal 4-sector nylon anchor with white galvanized fully threaded chipboard screw - Can also be used with lag screws and metric pitch Characteristics: Articolo: X1 EVO 6 Ø x L.: 6x30 mm. Confez.: 200 pz. Unit of measure: CF

Nylon plug - With T.S.P.screw torx cut in steel 5.8 Characteristics: Articolo: MRSZ104 Ø x L: 8x60 mm. Vite: 5,5x85 mm. Unit of measure: PZ

With T.P.S. screw TORX cut - Screw Ø 5.5 mm cemented - Screw Ø 7mm steel 5.8 Characteristics: Articolo: MU-XL Ø x L.: 8x80 mm. Vite: 5,5x85 mm. Unit of measure: PZ

Nylon plug - With T.S.P.screw torx cut in steel 5.8 Characteristics: Articolo: MRSZ101 Ø x L: 6x60 mm. Vite: 4x65 mm. Unit of measure: PZ

For fast dry fixing of EPS panels on concrete, solid brick and hollow brick - 70 mm high modulus HD-PE nail, 90 to 150 mm nylon nail (as per current legislation) Characteristics: Misura: 70 mm. Ø foro: 10 mm. Ø testa: 50 mm. Unit of measure: PZ